Antibacterial finishing

Kalıcı Antibakteriyel ve Antiviral Yüzeyli Yeni Kolzer Kaplama Makineleri

Bilimsel çalışmalar, bu kimyasal elementin antibakteriyel ve antiviral özelliklere sahip olduğunu göstermiştir; Kolzer makineleri ile Püskürtme tüm yüzeylere uygulanabilir.

Her gün temas kurduğunuz yüzeylere "püskürtülecek"  antibakteriyel bakır kaplama, Coronavirüsün (Covid-19) iletimini azaltmaya olanak sağlar. Bu durumu Birleşik Krallık'taki Southampton Üniversitesi tarafından, bu metalin antibakteriyel özelliklere sahip olduğu bir araştırma ile açıklayalım. Southampton Üniversitesi Çevre Sağlığı Bölümü'nün CORDIS Başkanı Profesör Bill Keevil, "Bu makalede, antimikrobiyal bakır temas yüzeylerinin kullanılmasının sadece kontaminasyon zincirini bozmakla kalmayıp aynı zamanda antibiyotik direnci geliştirme riskini de aktif olarak azalttığını gösterdik." Şeklinde açıklamaktadır. (burada bağlantı) -. Bu, kritik ortamların yeterince temizlenmeye devam etmesi şartıyla; bakır, patojenlere karşı mücadelede önemli bir ek araç olarak kullanılabilir ».

Aslında, kapı ve pencere kolları, tırabzanlar, ışık anahtarları ve asansör düğmeleri, en çok dokunduğumuz nesnelerden sadece birkaçını belirtmek için yeterli. Özellikle bu acil durum döneminde, ancak sadece bu acil dönemde değil. Aynı zamanda sürekli olarak dezenfekte edilmesi gerekir, çünkü OMS ayrıca "SARS -COV 2 bulaşmasını önlemek için iç ortamların sanitasyonu için endikasyonlar" belgesinin son versiyonunda da önermektedir.

Her durumda, daha önce de belirtildiği gibi, bir antibakteriyel bakır kaplama Covid-19'un bulaşma riskini daha da azaltmaya olanak sağlar.

İşte tam da bu nedenle KOLZER, tüm dünyayı etkileyen sağlık acil durumuyla yüzleşmeye katkıda bulunmaya devam ediyor. Nasıl mı? Günlük olarak temas kurduğunuz yüzeylerde bakır nanoparçacıkların vakumla biriktirilmesi için beceri ve makine sağlayarak.

"Kolzer makineleri, Sputtering tekniğini kullanarak antibakteriyel bakır kaplama uygulamasına olanak sağlar " diyor Kolzer Direktörü Antonio D'Esposito. " Süreç hızlı, ucuz ve her şeyden önce çevre dostudur. Aslında süreç vakum ortamında yapıldığı için, metalin yüksek verimlilik, homojenlik ve işlevsellik ile herhangi bir yüzeye birikmesi sağlanır ".

Şu anda, Cologno Monzese-Milan merkezinde, testler ve denemeler için yaklaşık 6 endüstriyel reaktör mevcuttur ve kullanıma hazırdır.

"Kolzer uluslararası bir gerçeklik olmasına rağmen, köklerimize çok bağlıyız -  diyor D’Esposito -. " Ve tam da bu nedenle sağlık acil durumunun bu dönemiyle yüzleşmemize katkıda bulunmak istiyoruz. "

An antibacterial copper coating, to be "sputtered" on the surfaces with which you come into contact daily, allows to reduce the transmission of Coronavirus (Covid-19).
To say it is a research by the University of Southampton, in the United Kingdom, according to which this metal has antibacterial properties. "In this paper, we demonstrated that using antimicrobial copper contact surfaces could not only disrupt the chain of contamination, but at the same time actively reduce the risk of developing antibiotic resistance," said Professor Bill Keevil, chief of CORDIS. of the Environmental Health Department of the University of Southampton (here the link) -. This is on condition that the critical environments continue to be adequately cleaned; copper can be used as an important additional tool in the fight against pathogens ».

In fact, door and window handles, handrails, light switches and elevator buttons, to name just a few, are the objects we touch the most. And especially in this period of emergency, but not only, it is necessary to sanitize them continuously, as OMS also suggests in latest version of the document "Indications for the sanitation of internal environments to prevent the transmission of SARS -COV 2 "
In any case, as already mentioned, an antibacterial copper coating allows to further reduce the risk of the transmission of the Covid-19.

Precisely for this reason Kolzer continues to make its contribution in facing the health emergency that is affecting the whole world. How? Providing skills and machinery for the vacuum deposition of copper nanoparticles on the surfaces with which you come into contact on a daily basis.

"Kolzer machines allow you to apply an antibacterial copper coating using the Sputtering technique - explained Antonio D’Esposito, Director of Kolzer -. The process is fast, cheap and, above all, eco-friendly. In fact, the processing is carried out in a vacuum and this allows the metal to be deposited on any surface with high efficiency, uniformity and functionality ".
Currently, around 6 industrial reactors for tests and trials are available and ready for use at the Cologno Monzese- Milan headquarters.

"Although Kolzer is an international reality, we are very attached to our origins - concluded D’Esposito -. And precisely for this reason we want to make our contribution in facing this period of health emergency ".

9001 gm en IQNet gm al